Stamped concrete services in Santa Fe Springs CA - a surface that looks like stone
Plain gray slab, or stamped color gone dull? We pour new stamped work and reseal old work so the color shows again.
- Licensed and insured.
- Free on-site estimates.
- Expect a reply within 1 business day.
What is stamped concrete, and is it right for your yard?
Stamped concrete services in Santa Fe Springs mean we pour a slab, press a texture into it and color it so it looks like slate, brick or natural stone. You get a surface you walk and sit on that also looks like part of the landscape, and the job runs in two stages because sealing waits until the concrete has cured.
Most people who call about stamped work have a plain gray patio, walk or pool area they're tired of looking at, or a stamped slab whose color has gone flat. The price moves with the size of the area, the pattern, how many colors you want, whether an old slab has to come out first and which sealer you pick. The schedule turns on the pour and then the cure, which is the wait while the concrete hardens before it can take sealer. If you're starting from bare dirt, it can make sense to plan it together with a new concrete patio, and the written estimate gives you your own figure.
How can you tell your stamped concrete needs work?
Color looks dull and flat
When stamped color that used to look deep now looks dry and chalky, the sealer has usually worn thin. Left alone, the bare surface picks up stains and the color keeps fading.
Water soaks in fast
If a spill or a hose spray darkens the slab right away instead of beading up, the sealer has stopped keeping water and stains out. Waiting lets oil, rust and leaf stains get into the concrete, where they're much harder to get out.
Cloudy, thick or peeling sealer
A white haze, a plastic-looking skin or flaking patches usually mean sealer went on too heavy, too often or too soon. Another coat on top only adds to the buildup, and stripping it gets slower and costlier the more there is.
What our stamped concrete service includes
On a new job we break out and haul away any old slab, set the forms and pour. While the concrete is still workable we add the color and press the pattern in, then cut control joints, shallow grooves that give the slab a planned place to crack instead of across your pattern. The slab cures before any sealer goes on. Stamped work looks only as good as its sealer, so I help you pick one that brings out the color, and we reseal when the surface shows it's ready, not on a calendar.
Stamped work rarely sits alone. A patio usually needs a way to reach it, and we pour that walk as part of our concrete sidewalk building work. If the slab inside your garage is cracked or sinking, garage floor concrete is its own job, and we can look at it on the same visit.
Slate or natural stone pattern
This suits patios and pool areas where you want an irregular, natural look. The varied texture and color hide everyday dirt better than plain gray does.
Brick pattern
This suits walks, borders and front entries where a straight, ordered look fits the house. It also works as a border around a stone-pattern center.
Resealing an existing stamped slab
This is for stamped concrete that's already in but looks dull or soaks up water. We clean it and reseal it so the color reads again, with nothing new poured.
Get a written estimate for your stamped patio or walk
We get back to you within one business day, then I come out to see the area and hear the look you want. The on-site estimate is free and written, with no pressure and no obligation.
(562) 689-9662- Based in
- Santa Fe Springs, CA 90670
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
What happens after you call about stamped concrete?
Here's how it goes from your first call to the walk-through, so you know who you'll talk to and what you'll have in hand.
Call or send a message
Call (562) 689-9662 or use the form, and I come out myself to look at the area. I want to hear what pattern and color you have in mind before anything gets priced.
Read your written estimate
It spells out what's included and what isn't, so you can see where the money goes before you agree to anything. Before anything gets scheduled, we check what the city or county office for your address requires.
Pour, cure, seal, walk through
Our crew does the work with me on site, and the sealer waits until the slab has cured. When it's done, I walk the finished job with you.
Why Santa Fe Springs homeowners call us for stamped concrete
I look at every job myself
I come out to see every job before it's priced, and our crew does the work with me on site. The person who explained the plan is the one standing there when it gets built.
Licensed and insured in California
We're licensed and insured. In California, a concrete contractor is the trade that forms, pours, places and finishes flat concrete work, which is exactly what a stamped patio or walk is.
In business here since 2023
I started this business in 2023 after learning concrete on other people's crews, and most of our calls come from homeowners around Santa Fe Springs. Flatwork, meaning patios, walks and driveways, is where I learned the trade, so stamped slabs are work we know well.
Once stamped concrete sets there's no easy do-over, so I'd rather tell you the hard parts at the estimate than have you find them in the finish later. Tell us about your area and we'll set a time to come look.
Stamped concrete, walks and permits in Santa Fe Springs
In Santa Fe Springs, the city says walks 30 inches high or less over grade need no construction permit, though other agencies may still need to review them. That rule names walks, so it doesn't settle whether a stamped patio or driveway needs one, and the city's building permit information is where to check. Before we schedule, we look up what the office for your address requires, and when a permit is needed we handle the paperwork with you and settle up front who calls for each inspection. If there is a permit, the city first wants a recycling form approved showing at least 75% of the project's waste will be reused or recycled, which matters when an old slab comes out. A concrete truck or materials sitting in the street need a request through the city's online Permit Portal. Under state rules, someone without a license can only take on work up to $1,000, and only when it needs no permit and they have no one working for them, so ask to see a license before you hire anyone.
Most of the stamped work we see around here goes in next to plain driveways and walks on established streets, so matching the new pattern and color to what's already there is part of the plan. We're based in Santa Fe Springs and work across the cities around it, with the same kind of jobs in Norwalk and Downey. If you don't see your city listed, just ask.
Questions about stamped concrete in Santa Fe Springs
How much does stamped concrete cost in the Los Angeles area?
Stamped concrete in the Los Angeles area usually costs about $15 to $30 per square foot of finished surface, and that's the going range for the area, not our price. Where your job lands depends on size, pattern, colors, old concrete removal and sealer, and your written estimate gives you the figure for your slab.
Does a stamped concrete walk in Santa Fe Springs need a permit?
A walk 30 inches or less above grade needs no construction permit from the city, though other agencies may still review it. For a stamped patio, driveway or anything you're unsure about, the city asks you to call (562) 868-0511 ext. 7560, and we check before we schedule either way.
How often does stamped concrete need to be resealed?
There's no set number of years, so you reseal when water and stains stop beading off or the color loses its depth. Resealing more often than that builds up layers that are slow and expensive to strip, so we go by what the surface shows.
What sealer brings out the color in stamped concrete?
A topical film-forming sealer, the kind that leaves a thin coat on top, is the usual choice because it deepens the color. Penetrating sealers soak in, generally need fully cured concrete and mostly leave the color as it is. A topical sealer has to go on with care, because too much or too early can spoil the look.
How long does stamped concrete need to cure before it's sealed?
It needs to finish curing first, and that time changes with how the slab is cured, the air temperature, the humidity and the concrete mix. That's why sealing gets its own date, set by the slab and not by the pour.
What is the best way to reseal stamped concrete?
Put the sealer on out of direct sun, because sun can raise bubbles that weaken the bond with the old coat. An industry sealing guide puts the best time at when the slab's temperature will keep falling for 3 to 4 hours afterward, which can mean working in the evening.
Related concrete work around your stamped slab
A new patio needs a way to reach it, and a plain or matching walk from the driveway or gate keeps feet off the lawn and mud off the stamped surface.
When the garage slab is cracked, uneven or pooling water near the door, a new poured floor gives you a flat, solid surface to park and work on.
Service areas for stamped concrete near Santa Fe Springs
Santa Fe Springs Concrete is based in Santa Fe Springs, California, and the 12 cities below each have their own page, including Whittier and Pico Rivera. We work across the cities around it too, so if yours isn't listed, just ask.
Santa Fe Springs, CA
Tell us the size and look you want
A rough square footage and whether you picture slate, brick or stone lets me come out ready to talk pattern, color and sealer for your space.