Concrete patio construction in Santa Fe Springs CA - a level slab on a solid base
Old patio cracked, sinking or holding water? We dig out and pack the base first, then pour a slab that drains away from your house.
- Licensed and insured.
- Free on-site estimates.
- Expect a reply within 1 business day.
What goes into a new concrete patio in Santa Fe Springs?
Concrete patio construction in Santa Fe Springs means forming, pouring and finishing a flat slab over a base we dig out and pack first, so you end up with an outdoor floor that sits level and drains away from your house.
Maybe the old patio has broken into pieces, or the back yard is bare dirt that turns to mud every time you water. The price moves with the size of the slab, how much old concrete or soft soil has to come out, how far we haul from the street and which finish you pick. The schedule turns on the weather and the curing wait before you can use it, and your written estimate lays out what's included so there's nothing to guess.
How do you know your patio needs replacing?
Cracks that keep growing
Hairline cracks that widen, or pieces that sit higher than the ones next to them, usually mean the dirt under the slab has moved. The longer you wait, the more water gets in and the bigger the trip edge gets.
Water pooling by the house
If water sits on the patio or runs back toward your door after you hose it off, the slab was most likely poured sloping the wrong way. Every rain and every watering puts that water against your walls.
One side sinking or lifting
A corner that dropped or an edge that rose usually points to a weak base or soil that swells when it gets wet. It rarely levels back out on its own, and a patio that tips only gets harder to use.
How we handle concrete patio construction
Most patio cracks start under the slab, so the base is where we spend our time. We check where the water runs, break out and haul off any old concrete, then dig past the soft dirt and pack the subgrade, the ground the slab actually sits on, so the new patio isn't resting on loose fill. We set forms with a gentle fall away from the house, place rebar, the steel that holds the slab together if it cracks, then pour and give it a broom finish, a light brushed texture so it isn't slick when wet. We cut control joints, shallow grooves that give the slab a straight line to crack along, while the concrete is still fresh, because joints cut late don't do their job. In summer we schedule the pour away from the worst heat and keep the new slab from drying out while it cures, the wait that lets concrete gain its strength before you use it. If the budget gets tight, cut the fancy finish before you cut the base, because nobody sees the base on day one but everybody sees it in a crack a year later.
A patio rarely stands alone. If you'd rather have the look of stone or brick, our stamped concrete services press a pattern and color into the same fresh slab, and if there's no good way to reach the patio from the driveway or side gate, we can pour a concrete sidewalk on the same trip so the two line up.
New patio on bare ground
This suits a yard that's dirt, lawn or loose pavers today. There's no tear-out, but we still dig out and pack the base, because lawn soil is too soft to hold a slab.
Tear-out and replacement
This suits an old patio that's cracked, sunk or tipped toward the house. We break it out and haul it away, then fix whatever underneath caused the trouble before we pour again.
Get a written estimate for your concrete patio
Send the form and we'll get back to you within one business day to set a time. I come out myself, measure the patio and give you a free written estimate, with no obligation.
(562) 689-9662- Based in
- Santa Fe Springs, CA 90670
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
What happens after you call about a patio?
From the first call to the last walk-through, here's who you'll deal with and what you'll have in hand at each step.
Call or send us a message
You call (562) 689-9662 or fill out the form, and we set a time to meet at your house. I come out myself, so the person looking at the job is the one who'll be there when it's built.
Walk the yard, get an estimate
I measure the area, see where the water goes and hear how you want to use the patio. You get a written estimate that spells out what's included and what isn't, so you know what you're paying for and can compare bids line by line.
Build the base, then pour
Our crew does the dig-out, the base, the forms and the pour with me on site. Once it's finished the slab cures, and we'll tell you when it's ready for foot traffic and when it's ready for furniture.
Walk the finished patio together
When the job's done I walk it with you, so you can see the joints, the finish and where the water runs. Bring every question you have, because this is the time to ask it.
Why homeowners call Santa Fe Springs Concrete for patios
The owner looks at every job
I come out to look at every job myself, and I'm on site while our crew does the work. If I tell you at the estimate that your base needs more digging, I'm the one standing there making sure it gets dug.
Licensed and insured for patios
We're licensed and insured. In California, the license for forming, pouring and finishing flat concrete is set by the Contractors State License Board, so it's fair to ask every bidder about theirs.
Pouring flatwork since 2023
I learned concrete on other people's crews and started this business in 2023, and flatwork, the patios, driveways and walks poured flat on the ground, is where I learned the trade. It's still most of what we pour, so a patio is everyday work for us, not a side job.
On a patio, the part that matters most is the part you won't see after the pour. Get in touch through our contact page and we'll set a time to walk your yard.
Patios, soil and zoning in Santa Fe Springs
Some lots around here sit on swelling soil, also called expansive soil, which soaks up water and pushes back, and a statewide soils guide notes it can make patio slabs lift, tilt or slide sideways. You can usually find out whether your lot has it from your home buyer's disclosures, the local building department, or a soil engineer or geologist. I look for it at the estimate and plan the dig-out and drainage around what I find, and we run into the same question on jobs in Norwalk and Downey.
Where the patio can sit on your lot is up to the city, and the city is updating its Zoning Code, so ask Santa Fe Springs Planning & Zoning at 562-868-0511 which zoning rules apply to your yard. We look up what the office for your address requires before anything is scheduled, so it's settled before the forms go in.
Questions about concrete patios in Santa Fe Springs
What does a concrete patio cost near Santa Fe Springs?
A concrete patio usually costs about $4 to $18 per square foot in the Los Angeles area, materials and labor included, going by City of Los Angeles figures. Where yours lands depends on tear-out, how much base work the ground needs, how far we haul to the back yard and whether you want a plain or decorative finish. Your written estimate gives you the number for your own yard.
Why do concrete patio slabs crack?
Most patio cracks trace back to the base, because poor base work lets a slab settle, end up thicker in some spots than others and hold water, and all of that leads to cracking. Swelling soil, covered above, can also push a slab from below until it cracks.
How long does a new concrete patio cure in summer?
In hot weather, curing should start as soon as finishing ends and run for at least 3 days, according to national concrete industry guidance. Curing just means keeping water from leaving the fresh slab, and crews do it with wet burlap under plastic sheeting, a liquid curing compound or by keeping the slab wet. Keep heavy furniture and the grill off until we tell you it's ready.
Who can legally build a concrete patio in California?
A licensed contractor should build it, since California's minor work exemption only covers jobs under $1,000, and only when the work needs no permit and the person doing it employs no one. Most patios take a crew, which already puts the job outside that exemption, so ask any bidder for their license before you sign.
How do I compare concrete patio bids?
Ask each contractor how they'll prepare the base, because weak base work is where cracking usually starts. It also helps to ask how they finish the surface, since hot-weather guidance calls for finishing without sprinkling water on the slab.
How do I take care of a concrete patio on expansive soil?
Repair or seal any gaps and cracks in the slab promptly, because that cuts down on water getting into the swelling soil underneath, according to a statewide soils guide. The less water reaches that soil, the less it swells and pushes on the slab.
Related concrete work that goes with a patio
Pick stamped concrete when you want the patio to look like stone, slate or tile but still want the strength and upkeep of a poured slab.
A new walk from the driveway or side gate gives you a firm, level path to the patio instead of a worn strip of lawn or loose pavers.
Service areas for concrete patios near Santa Fe Springs
Santa Fe Springs Concrete is based in Santa Fe Springs, California, and builds patios in all 12 service areas listed below, Whittier and Pico Rivera among them. If you don't see your city here, just ask.
Santa Fe Springs, CA
Book a patio estimate with the owner
Call (562) 689-9662 or use the form with the patio's rough size in square feet and any home buyer's disclosures about soil, so I come out already knowing what to look for.