Concrete contractor in Norwalk, CA - driveways and patios built on a solid base
Santa Fe Springs Concrete is a concrete contractor based in Santa Fe Springs and working in Norwalk, CA. We pour new driveways, patios, walkways and slabs, and replace old ones that have cracked, sunk or started holding water.
- Licensed and insured.
- Free on-site estimates.
- Expect a reply within 1 business day.
Norwalk homes and the concrete around them
Norwalk sits right next to Santa Fe Springs, where we're based, so it's a short drive for us and a city we're in regularly. Most of our calls here come from homeowners, and the houses are mostly single-story on flat lots, with a driveway out front, a patio or slab out back and a side walk that's been patched more than once. We also hear from small property owners who need a lot, a wall or a slab, the same mix of work we see in Bellflower.
Lots are tight and the houses sit close together, so the driveway is often the only way in for our equipment and the only place you park. That shapes most jobs here, from how we get the old concrete out to how we plan the pour so you have your driveway back as soon as the slab can take it.
Concrete services we do for Norwalk homes
When an old driveway has cracked through or sunk, we tear it out, pack a new base and pour a slab that sheds water away from the garage.
Many backyard patios here are thin slabs that have tilted toward the house over the years. We pour new ones pitched so rain runs out to the yard.
Stamped concrete gives a front walk or patio the look of stone or brick in one pour, which suits homeowners updating a plain older yard.
Side-yard walks and the path to the front door tend to heave and trip people as they age, so we replace them on a packed base.
A cracked, oil-stained garage floor in an older house can be broken out and repoured, so your car and workbench sit on a flat, sound slab.
Color, exposed stone and saw-cut patterns let a new driveway or entry match the house instead of looking like a gray patch out front.
Most lots here are flat, but where a yard drops off at the back or soil pushes on a fence line, a poured wall holds the dirt back.
For a converted garage, a back room or a workshop, we pour interior floors flat and level so tile, flooring or equipment sits right on top.
Older pool decks crack and pull away from the pool's edge, so we pour new ones with a grippy top for wet feet and a slope that drains.
Front steps on older homes often settle away from the porch or crumble at the edges. We form and pour new ones with even step heights.
When you're adding a room, a garage or a backyard unit, we pour the slab foundation it sits on, with the base and steel the plans call for.
For additions and new structures on a lot, we set the forms, footings and steel and pour the foundation the building's plans lay out.
Small property owners with a cracked lot behind a shop or apartment building call us to replace sections or pour a new lot built for daily traffic.
Patio covers, block walls and posts need a footing, the concrete pad under the load, dug and poured deep enough to carry what sits on top.
When a slab or part of a house has dropped, we look at why it moved first, then lift it back toward level and fill the gap underneath.
We saw-cut openings for a new door, trench a slab for plumbing or cut out a damaged section cleanly, so the rest of the slab stays whole.
Get a written estimate for your Norwalk concrete job
Send the form and we'll get back to you within one business day to set a time. I come out myself, look at the job and give you a free written estimate, with no obligation.
(562) 689-9662- Based in
- Santa Fe Springs, CA 90670
- Hours
- Mon–Fri: 6 AM–10 PM, Sat–Sun: 8 AM–10 PM
Working in Norwalk: licenses, permits and what sets the price
Before you hire anyone for concrete work in Norwalk, ask for their state license. California requires a current license from the Contractors State License Board for anyone who contracts for work that needs a building permit, uses employees or workers, or takes on a job worth $1,000 or more in labor and materials combined, and we're licensed and insured. Permits are a separate call, made by the city or county office for your address, so we look up what that office requires before we schedule, and when a permit is needed we handle the paperwork with you and settle up front who calls for each inspection. That can add time before the pour, which is why we sort it out first.
What moves the price here is mostly the size of the area, how much old concrete we break out and haul off, how much base work the ground needs, the thickness and steel where cars park, the finish, and how close we can get the truck. On a narrow street or a backyard behind the house, the mix may have to be pumped or wheeled in, and that adds labor. The schedule turns on the permit, if there is one, and on curing, the days a new slab sits gaining strength before it takes weight. Your written estimate spells out what's included and what isn't. We do the same work next door in Downey and South Whittier, so the conditions here aren't new to us.
What wears out Norwalk driveways and patios
Most of the houses we work on here have been lived in a long time, and their concrete shows it. Slabs get added piece by piece over the years, a patio poured against the back wall, an extra parking strip beside the driveway, a walk to the side gate, each on its own base and at its own height, so they crack where they meet and send water toward the house. When we replace them, we usually pour the area as one planned job, tied together and sloped as a whole, instead of patching on one more piece.
Lots are tight, so the driveway often carries more than one car, a work truck or a trailer. Where vehicles park, we build the slab thicker and put steel in it, because a slab poured for one small car won't hold up under that.
How a Norwalk concrete job runs, from call to walkthrough
Here's what happens once you reach out, from the first call to the day you walk the finished slab with me.
Call or send us a message
Call (562) 689-9662 or send the form with a few lines about the job, and we'll set a time for me to come out. It helps if you're home so you can show me what's bothering you.
I come out and look
I look at the slab, the ground under it and where your water runs, and I listen to what you want. Then you get a written estimate that spells out what's included and what isn't, so you know the price before anything is scheduled.
Our crew does the work
Once we know what your address requires, our crew breaks out the old concrete, digs out and packs the base, sets forms and steel, and pours, with me on site. After that the slab needs time to cure, so keep people, pets and cars off it until we say it's ready.
We walk the finished job
When it's done, I walk the finished job with you and go over the surface, the joints and how the water drains. If something doesn't look right to you, that's the time to say so.
Questions about concrete work in Norwalk
How much does it cost to replace a concrete driveway in Norwalk?
Your price is set as much by what goes under the slab as by what goes on top, so the size, the tear-out and the base work usually move it more than the finish does. A plain broom finish, the light brushed texture that keeps it from getting slick, costs less than stamping or color, and the base is the one place I won't cut, because it's hidden on day one and it's what keeps the new slab from settling like the old one. Call (562) 689-9662 and your written estimate will show where the money goes.
Which small concrete jobs can be done without a contractor's license in California?
Only jobs that meet every one of the state board's conditions: the labor, materials and all other costs total less than $1,000, the work needs no building permit, nobody is hired to help, and the person doesn't advertise as a licensed contractor. That limit used to be $500 and is now $1,000. Owners who build or improve existing structures on their own property, doing the work themselves or with their own paid employees, may also be exempt as owner-builders.
How do I check if my Norwalk address is in an earthquake hazard zone?
Type your address into the state's EQ Zapp map, and it shows whether the property sits in any of the state's mapped earthquake hazard zones, such as areas where water-soaked soil can give way in a quake. It also tells you if the state hasn't evaluated your area yet. If you're planning a foundation or a retaining wall and the map shows a zone, bring it up at the estimate so we can talk through what it means for the job.
How long does it take before I can drive on a new concrete driveway?
You can usually walk on a new driveway well before you can park on it, because the concrete keeps gaining strength for days after the pour while it cures. I'll tell you when it's ready for feet and when it's ready for the car, and we can plan the pour around when you need the driveway back.
Will my new concrete patio crack like the old one did?
Concrete can still crack, but a packed base and joints cut on time keep it from breaking up the way an old, settling slab does. We cut control joints, shallow grooves that give the slab a planned place to crack, early enough that a crack follows the line instead of wandering across the patio. Rebar, the steel laid inside the slab, holds the pieces together if a crack does open.
What causes a concrete driveway to sink and pool water?
Usually the subgrade, the dirt the slab sits on, was raked level instead of dug out and packed, so it settled and took the concrete with it. Water running under an edge can wash that ground out too, and a slab poured flat or tipped toward the house holds water from the start. At the estimate I check where your water runs before we talk about replacing or raising it.
Santa Fe Springs, CA
Get your Norwalk concrete job estimated
Ask for our license details when you call, so you know exactly who's pouring your concrete before anyone breaks ground.